How to Replace Outer Tie Rod 2005-2007 Nissan Murano скачать в хорошем качестве

How to Replace Outer Tie Rod 2005-2007 Nissan Murano

Buy Now! New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK01563 New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00424 Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections. This video shows you how to install new TRQ outer tie rods on your 2005-2007 Nissan Murano. This repair was done on a 2006 Nissan Murano S 3.5L and the process should be similar on the following vehicles: 2003 Nissan Murano 2004 Nissan Murano 2005 Nissan Murano 2006 Nissan Murano 2007 Nissan Murano Tools you will need: • Pry Bar https://trq.video/oiI-1AXAA00020 • 22mm Wrench • 19mm Socket • 21mm Socket • 22mm Socket https://trq.video/och-1AXAA00266 • Blowtorch • Locking Pliers https://trq.video/ob6-1AXAA00139 • Metal Cutters • Air Chisel • Torque Wrench https://trq.video/ot3-1AXAA00044 • Anti-Seize Grease • Hammer • Rubber Mallet Subscribe:    / @trq   Check out our playlist: Nissan Murano 2003-2007 1st Generation:    • Nissan Murano 2003-2007 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.