Mavlink LED Controller v2.0 Pixhawk APM external RGB LED for ardupilot and PX4 скачать в хорошем качестве

Mavlink LED Controller v2.0 Pixhawk APM external RGB LED for ardupilot and PX4

The Mavlink LED Controller includes a controller board, 6 sets highlight LED strips and one USB to UART module. It is compatible with any flight controller with Ardupilot or PX4 firmware like Pixhawk serial, APM serial, Pixracer, NAVIO2, PXFmini etc. It is compatible with Mavlink 1 and Mavlink 2 1. The front 2 LEDs (F1 and F2) show the orientation of the aircraft and get solid when the aircraft arm, breathe when disarm. The color is changeable via the configurator 2. The rear 2 LEDs (R1 and R2) show the status of the aircraft(GPS, RC failsafe, low battery, critical low battery, flight mode changing). Refer to the table below for more information about the aircraft status 3. Other 2 LEDs (F3 and F4) show solid color. The color is changeable via the configurator 4. All LEDs can Turn on/off via one of the Ch6 to Ch16 The configurator software can be download from below address https://drive.google.com/open?id=16IS...