How To Install the Onefinity CNC Z-20 Motor Brake | Support скачать в хорошем качестве

How To Install the Onefinity CNC Z-20 Motor Brake | Support

How to install the Onefinity CNC Z-20 Elite Motor Brake. Onefinity CNC is proud to announce we now offer a Z-20 Z slider brake. This brake is intended for use with the Z-20 Z sliders with an 80mm spindle. Due to the heavy weight of a 80mm spindle and the more severe pitch of the z-20 ball screw for fast movement, a user can possibility experience z-slider drop. This brake holds the z slider from moving when the power is turned off or estopped. Only when power is applied can the z slider move. This is only for use with Onefinity Elite Machines. The motor is the same 1.2nm closed loop stepper but has a built in brake. There is no need for any external drivers or additional wiring. This is a simple one minute swap that anyone can do! Get yours today here: https://www.onefinitycnc.com/ *Special note: 1) Older machines may not have a coupler that has a grub screw. Disregard this grub screw step if your coupler does not have a grub screw to tighten to the flat part of the motor shaft. 2) All blue dip switches should follow this FAQ: https://forum.onefinitycnc.com/t/onef... https://www.onefinitycnc.com https://forum.onefinitycnc.com