AFIM® Dry Desiccant Dehumidifier + Air Door (with AFIM® Heat Recovery Unit) solves moisture problems скачать в хорошем качестве

AFIM® Dry Desiccant Dehumidifier + Air Door (with AFIM® Heat Recovery Unit) solves moisture problems

Air In Motion presents: The AFIM® Dry industrial desiccant dehumidifier Condensation is one of the main causes of all problems arising from moisture. An open passage to a cold store creates fog in the passage. It results in dangerous visual barriers for internal transport and to energy loss. Slippery floors cause dangerous situations and logistical obstacles. This increases the chance of damage and accidents. Moisture enters the cold store unhindered, creating snow- and ice formation around the passage. The evaporators lose their capacity and need to be defrosted unnecessarily often to remove the large amounts of moisture. Moist will also cause problems at temperatures above 0 degrees Celsius. Mould results into damage to products, materials and buildings. Mould is also a health risk for people present in this room. Corrosion causes serious damage to equipment and structures. This will shorten the lifespan and increase service- and maintenance costs. If the relative humidity is too high, malfunctions will occur, leading to standstill. Powders and granules will stick. As a result, the quality will deteriorate, which results into hygiene risk or loss. The AFIM® Dry solves all these problems invisibly. With an open passage to a cold store, the cold air will leave the cold climate and warm, moist air will flow into the cold store. This is called natural heat transfer. The AFIM® Dry in combination with an IGLO® Air Door blocks the natural heat transfer and ensures a dry air jet right in front of the passage. This solution makes annoying strip curtains superfluous and avoids fog and visual barriers in the passage. A dry floor ensures a trouble-free logistical flow without damage and dangerous situations. With the right humidity powders and granules will not stick. The cold store remains snow- and ice-free. Evaporators maintain their optimum capacity and the number of defrosting actions is reduced. This results in energy saving. Utilising the AFIM® Dry avoids mould formation. Damage to materials, buildings and products are a thing of the past. Hygiene is maintained. By reducing the humidity, there will be no more corrosion. As a result, lifespan of equipment and constructions will be optimal. Service- and maintenance costs are therefore limited. Malfunctions and standstill are avoided. By means of the AFIM® Heat Recovery Unit, up to 75% of the energy in the air to be discharged will be reused. This makes the AFIM® Dry EVEN MORE efficient. This makes the AFIM® Dry in combination with the AFIM® Heat Recovery Unit one of the most energy-efficient solutions in the world. Advantages: • Provides significant cost savings • Is one of the most energy-efficient solutions worldwide • Solid, robust and 100% developed for application within the industry • Thanks to its versatility suitable for any situation • Increases comfort and safety in the workplace Would you like to know more about the solution for your situation? Please, feel free to contact Air In Motion. With kind regards, Team AIr In Motion B.V. Email: info@airinmotion.nl Phone: 0031 478 853 287