Samsung Washer Dirt / Mold Fix скачать в хорошем качестве

Samsung Washer Dirt / Mold Fix

How to completely fix a moldy Samsung washer. Once you know how to get inside of it you're just a little elbow grease from fixing the issue. Start by removing a few standard screws around the top of the machine. It will hinge off from there. The plastic water fill ring will easily pop off, but is easier to unclamp the hoses and remove after the whole drum is out. Use a flat screw driver to pop off the cap in the center of the agitator. Remove the exposed nut and lift up on the agitator. *pro tip, a paint can opener makes it easy to lift and remove these parts. This leaves just the drum, and a half dozen exposed bolts. Once you remove them the drum will lift right out. When reinstalling, tightening the drum back in a star pattern like you would a car tire. *pro tip, use a rim brush in a powered drill to clean quickly. Found at automotive stores, or just break the handle off of a $1 toilet brush from the dollar store and tighten in a drill.