Blow Hookah Tutorial & Blow Stand Tutorial скачать в хорошем качестве

Blow Hookah Tutorial & Blow Stand Tutorial

If your hookah set came with green led hoses please call our warehouse so we can send you the updated purple led hoses, new tanks and tank covers. For this tutorial we will be instructing you on how to fill and use your blow club edition tanks with the blow electronic hookah While filling your tank for the first time, make sure to fill it past the portion of the tank with the exposed wick, but no more than 75% of the way full. This will optimize the tanks ability to absorb the liquid and will help as you begin to train your tank When screwing the tank onto the hose, be sure not to tighten it all the way. You should turn your hand to screw it on to the hose no more than 8 rotations. If you screw the tank on too tightly, you will damage the threading of the hose, making it inoperable. After the tank has been filled, let it sit between 5 to 15 minutes. This only needs to be done the very first time you fill any given tank. After you have let the tank absorb the liquid, you need to start the training process. This is a onetime process that you will need to do with each tank. To train the tank, start with the Hookah set to 3.5 and take a couple of hits. Increase the voltage to 3.7 and take a couple of hits. Repeat this process at 3.9 and 4.1, finally ending on 4.3 volts. Blow Club Edition tanks are optimized to operate at 4.3 volts. Keep in mind there is no benefit to operating the device with the Pro Tank at any other settings. Voltage does not help produce more vapor, and increasing the voltage above the optimal level can cause a harsh, burnt taste. Using the tank below 4.3 volts can cause the tank not to respond at all. If you prefer a smooth, easy to draw hit similar to a traditional Hookah, make sure to leave the tank cover on as it allows for more air flow. Following the procedures mentioned your tank will last you for several sessions the moment the tank has any bitter or harsh taste at 4.3 volts it is time to replace the tank. If you are switching between tanks make sure you clean the threads on the hose where the tank screws in with a Q- tip and some rubbing alcohol as the threading can sometimes have e liquid residue. Once cleaned follow the same procedures if training a new tank discussed above. ★ Subscribe Here ➜    / blowvapes   ★ Connect With Us https://www.BlowHookah.com   / blowvapes     / blowhookah     / blowhookah   Footage is Property of BLOW, LLC