ITC#89:- Atari 2600 6-switch UAV Install Process (NTSC) скачать в хорошем качестве

ITC#89:- Atari 2600 6-switch UAV Install Process (NTSC)

This video was originally filmed about 2 years ago and some of the original video/audio was lost in that time. But it has been a long time coming and I'm glad to finally release and share my install process for UAV setups for both light and heavy 6-switch Atari 2600 NTSC consoles. This install process differs greatly from the common method that attaches the UAV piggyback onto the 4050 IC chip that is present on these model 2600s. The 4050 in addition to handling the video buffering, also provides the circuit for the fire button triggers on the controllers and isn't always in a socket on these models. Therefore I don't use this method personally and use the point to point method shown in this video as it doesn't pose any risk to the TIA or 4050 IC chips in the console. ----------------------- Time Stamps:- 00:00 - Intro & Video Purpose 01:37 - Tools Needed for the Project 03:05 - Disassembling the 2600 6-switch console 07:10 - TIA to UAV signal/wiring diagram 08:40 - UAV Pre-install board prep 09:44 - UAV installation to main board 10:59 - Disabling R213 to prevent color issues through UAVk 12:12 - Getting audio wired up 14:20 - UAV + audio output testing 15:21 - Outro ----------------------- Parts & Tools Needed:- UAV basic board Audio/Video output cabling or jacks #2 Phillips head Screwdriver Wire strippers Soldering Station sections of various wire lengths as needed Flush Cutters Cleaning supplies (toothbrush, cotton buds, & IPA) Optional/Possible Additional Tools:- Small needle nose pliers Tweezers De-soldering braid/wick 10µf 16v electrolytic capacitor (for audio - Optional) 4 to 8k 1/4w 5% resistor (for audio - Optional) ------------------------- UAV boards can be purchased from The Brewing Academy Store listed below: https://thebrewingacademy.com/ ------------------------- A printable and detailed installation PDF guide is available from the link below: https://tinyurl.com/yeyncckh ------------------------- Intro music :- "Chroma Mirage" by Luis Quintero (Lufus) composed exclusively for the Ivory Tower Collections. Additional music :- "Strong Feelings" by Luis Quintero under Bitonal Landscape from the album 'The Fifth Kind - Before the Contact' released in 2017. Be sure to check out Lufus' entire discography here: https://bitolands.bandcamp.com/ Under the current name of Lufus over on Spotify: https://open.spotify.com/artist/15NlQ... ------------------------- Video marked as "Not made for kids" due to content is intended for more mature age groups, adults, and those with some basic electronics knowledge and skill.