How to replace BOCHU BOCI protective screws anti collision set for BLT64X laser cutting head скачать в хорошем качестве

How to replace BOCHU BOCI protective screws anti collision set for BLT64X laser cutting head

Mobile, Whatsapp, wechat: 008615814434346 Email: reliablelaser.caroline@hotmail.com WEBVTT Kind: captions Language: en-US 00:00:09.206 -- 00:00:23.383 Firstly, remove the protective screws to be replaced. 00:00:24.528 -- 00:00:28.901 Broken protective screws 00:00:36.542 -- 00:00:48.865 Install new protective screws 00:01:00.095 -- 00:01:05.640 Check if the spring seal (O ring) is good. 00:01:07.515 -- 00:01:10.897 Clean 00:01:10.897 -- 00:01:14.642 After cleaning, examine the spring seal again. 00:01:17.100 --00:01:20.723 Apply masking tape 00:01:29.125 -- 00:01:35.720 Remove the broken protective screws. 00:01:39.776 -- 00:01:44.244 Check if there are any foreign objects inside the hole. 00:01:44.334 -- 00:01:49.307 Remove the set screws from the threaded hole. 00:01:57.559 -- 00:02:00.459 Install new set screws 00:02:00.460 -- 00:02:15.510 Do not tighten the set screw all the way. 00:02:37.354 -- 00:02:56.414 Clean and check channel 00:03:08.766 -- 00:03:12.443 Before installing, examine the spring seal again 00:03:13.733 -- 00:03:20.918 Align the anti-collision screws with the mounting holes. 00:03:23.823 -- 00:03:32.941 Pre-tighten the set screws diagonally. 00:03:36.100 -- 00:03:43.664 Tighten the pre-tightened screws again. 00:03:44.180 -- 00:03:48.839 When shaking the amplifier, no loosening.