Hornby R8245 Sapphire Controller скачать в хорошем качестве

Hornby R8245 Sapphire Controller

Programming the auto-control cycle on the Hornby R8245 Sapphire Decoder The FIRST thing you need to know is that CV 140 turns the Auto control Cycle ON or OFF. The SECOND thing you need to know is the value to write to CV140. The only value you need to remember is 12. Think of the 12 Days of Christmas! The THIRD thing you need to know is the value to write to CV140 to turn off auto control. This is easy to remember: It is a zero, zadda, zilch, nothing. Now you have understood those basic things - writing 12 to CV 140 turns on auto control and writing a zero turns it off. You can now enter the values needed for duration and speed.. In this example we are going to prorgramme an auto control cycle which will make the train run for 30 seconds in one direction and then run back for 30 seconds at the same speed. To wait initially for 5 seconds, write 5 to CV123 To travel forward for 10 seconds, write 10 to CV127 To set a speed of 20, write 20 to CV124 Now, having programmed the outward journey, you must programme the return trip! To wait at the station for 10 seconds, write 10 to CV131 To set reverse speed of 20, write 20 plus 128, (which makes 148) to CV132 To set a duration of 30 seconds for the return trip, write the value 30 to CV135 And finally, to wait 5 seconds atyour first station, write 5 to CV139 That's it! The auto control cycle is now programmed. You can now write 12 to CV 140 to the decoder to get the train going by itself. Things to remember! Only set a slow speed and a short duration initially - once the loco is under auto control, your DCC command station cannot control it until a zero is written to CV 140. An easy way to programme the Sapphire decoder is to use Decoder Pro which is a part of JMRI However you can programme the Sapphire decoder with any DCC system. If you are using Dynamis, move the joystick left or right to find the loco with the Sapphire Decoder On Dynamis, having selected your loco, press the fourth button, it will say 'Edit Name'Move the joystick until it says 'PROGRAM. Press the 4th button again. It will say WRITE ADDR ON MAINTRACK. Move the joystick unti it says PROGRAM ONSERVICE TRACK. Theme Music by SfxValley    / sfxvalley