Operating Glambot® and Snappic With Only One iPad скачать в хорошем качестве

Operating Glambot® and Snappic With Only One iPad

00:00 - Introduction 02:36 - filming 03:15 - end Recommended Equipment: iPad (13" screen recommended / cellular recommended) 3ft coiled usb c to usb c cable (Camera to Glambot data port) 6ft usb c to usb c cable (iPad to Glambot data port) Magnetic Wireless iPad Charger (Check model and compatibility before purchase) Disclosure: This help article includes affiliate links. As an Amazon Associate, Glambot® earns from qualifying purchases at no extra cost to you. Additional Equipment: If using an iPad that is not compatible with the magnetic wireless charger, you can use an Apple USB-C to Digital AV Adapter + USB-A to USB-C Cable. (See charging an iPad while using a wired camera connection) Instructions: Connect the iPad to the Glambot® Bluetooth iphone glambot bluetooth connection Connect the iPad to the Glambot® Wi-Fi glambot wifi connection Turn on the iPad cellular data (if applicable) Go to the Cellular Data settings and turn on Wi-Fi assist Open safari and type in the Glambot® Motion Control URL Tap the 3 dots at the top of the screen and select [Split View] Open Snappic and adjust the screen divider as needed When prompted, select [Use Cellular Data]. This will allow your videos to upload and send, while still controlling the robot through the local network. Select your event Scroll down and tap [Select Accessories] - [Volume Buttons] Scroll down and tap [Configure Camera] and select desired camera, then tap [Done] For iPhone - select desired built-in lens. For DSLR - ensure proper cable connection and select the camera (note that the options do not matter for dslr cameras, all options are equivalent). For additional help connecting a DSLR camera, see DSLR Setup and Settings. For GoPro - tap [Search for GoPro Camera] and select the GoPro. For additional help connecting a GoPro, see GoPro Setup and Settings. snappic configure camera snappic camera list canon r8 Tap [Start Photo Booth] and configure the camera settings as needed snappic start photo booth Tap [Start Booth] You're now ready to operate the Glambot® Motion Controls and Snappic using split screen on an iPad *If using an iPad without a cellular connection, your videos will not be able to upload in real time. This is because the Glambot® local Wi-Fi connection is needed to operate the Motion Control software. Instead, you will have to connect to Wi-Fi after the event so the videos can upload and send. https://www.getglambot.com/workflow Advanced Settings: If the videos in Snappic are not uploading or you are having trouble connecting to the cellular data while simultaneously controlling the Glambot, follow these advanced settings: Go to the Wi-Fi settings on the iPad and tap the blue "i" logo next to the Glambot network Scroll down to IPV4 Address, then tap and hold on the IP Address and click copy Click [Configure IP] and select [Manual] Paste the IP Address Enter 255.255.255.0 for the Subnet Mask Leave Router empty Click [Save] in the top right corner You will now see a spinning wheel when connecting to the Glambot Wi-Fi signal. This is normal and will still allow for control of the Glambot locally on the network. You should see the cellular connection in the top right corner of the iPad, which will allow the internet connection and Snappic videos to upload.