У нас вы можете посмотреть бесплатно 3dLabPrint videoguide 2 MatterControl или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
MatterControl slicer setting for 3dLabPrint airplanes Please take a look also to PDF/VIDEO userguide. !!Note!! We recommended 0.7mm retraction for non-bowden extruders, for bowden 4-6mm is OK, we need retraction for all spots not only for outer perimeters! If you find underextrusion at layer startpoints increase extra restart distance this value add some extra filament after retraction (if your slicer is able to) Good first layer adhesion is very important, you should see :-) Turn OFF cooling fan for better layer adhesion (HE fan of course ON) we dont need it for our thin wall printing... We try lot of filaments and so far PLA is still the best for our models (2015). HEATED BED is very recommended, 70celsius (print without warping ends) Looks like any standard quality PLA is OK for our planes, BUT it always depends on combination PLA vs. Extruder vs. HotEnd. Sometimes you need to experiment with HE temperature. We find that some color of filament has lower layer adhesion also. Nowadays there is lot of 3dprinters on the market, very most of them is OK for printing our aircrafts (specific thinwall printing...) suficient volume, heated bed, 0.4mm nozzle. We use Prusa i3 ORIGINAL and Makerfarm i3 10 (works well)