2mm Compression with Dynamic Compression Plating (DCP) principle скачать в хорошем качестве

2mm Compression with Dynamic Compression Plating (DCP) principle

Steps for 2mm Compression with Dynamic Compression Plating (DCP) principle Select Appropriate Plate and Screws Choose a dynamic compression plate of the correct size (e.g., 4.5 mm or 3.5 mm system, depending on bone and fracture type). 1. Use standard cortical screws for compression, not locking screws. Neutral or centric screws can be locking ones. 2. Position the Plate Center the plate over the fracture, bridging it symmetrically if possible. 3. Place one neutral screw: Centric cortical or a locking screw on side of fracture 4. Drill for Eccentric Position (opposite side) Use the eccentric (compression) guide in the dynamic portion of the DCP hole (away from the fracture line). Drill one hole on the opposite side of the fracture eccentrically. 5. Insert and Tighten First eccentric Screw Insert and tighten the first cortical screw. As you do this, the bone will move toward the fracture, generating about 1 mm of compression. 6. Repeat another eccentric screw on another hole adjacent to the first eccentric screw Now drill and insert a second screw eccentrically on the other side of the fracture. Before tightening loosen the first eccemtric screw. 7. Put remaining screws in centric mode    • 2mm Compression with Dynamic Compression P...