DuraVent DuraBlack Stove Pipe - How to Install DuraBlack Single Wall Stove Pipe скачать в хорошем качестве

DuraVent DuraBlack Stove Pipe - How to Install DuraBlack Single Wall Stove Pipe

Click Here http://tinyurl.com/olptsz5 to see all of our Chimney Pipe. Joe shows you how to install DuraTech DuraBlack Stove Pipe. Insert the adapter or Connector section of pipe into the installed ceiling support box. Install it so the seams are in the back. For the stove pipe connector with a trim ring, you will insert the pipe into the support box then slide the trim collar on and slide up to the support box, until it is next to the pipe bead. Using the four pre-drilled holes in the trim collar as a guide, drill 1/8" diameter holes in the support box, and attach using the sheet metal screws provided. Next you will need to install the stove top adapter into the collar on the stove. You may need to bend in some of the crimped end to help the adapter go into the collar a little easier, it will be a very snug fit. Place adapter on top of the collar and gently tap down into the opening with a rubber mallet, being sure to tap down all the way around. Slide the first stove pipe section upwards over the adapter. Be sure to keep the seam facing the wall. Push the pipe section upwards onto the adapter. The adapter will go into the stove pipe. Install the second section of pipe, this will generally be the adjustable piece, on the stove collar or adapter. Note that the bottom of the Pipe Section goes inside the stove collar or appliance adapter. Also, remember to place the seam to the rear of the stove. Now you can connect the bottom stove pipe to the top stove pipe, slide the adjustable pipe up to see if the stove is in the correct position, you may need to shift it slightly to ensure a plum and level install. Install 3 sheet metal screws at each joint to ensure stability. You will also want to wipe down the stove pipe to remove any glue or oils from your hands, if the fingerprints are left on the pipe they will be very visible after you use the stove pipe. Also, you may have some light smoking the first couple of times you use your wood burning stove. DuraBlack must be installed with at least an 18" Clearance to Combustibles. Read all instructions carefully before starting the installation. The DuraVent warranty will be voided, and serious fire, health, or other safety hazards may result from any of the following actions: • Installation of any damaged DuraBlack component. • Unauthorized modification of any DuraBlack component • Installation of any component part not manufactured or approved by DuraVent. • Installation other than as instructed by DuraVent and the appliance manufacturer. Consult your local building codes before beginning the installation. Click Here http://tinyurl.com/pnbgnc8 to see all of our Wood Stove Pipe Please remember to like and share this video with friends and family.