Home Theater - Bad Sound скачать в хорошем качестве

Home Theater - Bad Sound

Home Theater Bad Sound Partial Short between layer / bad cap 👌👍👌🔨🩺🩺🩺🩺☠️☠️☠️🔨🔨🛠️👌👍 you’re dealing with a situation where a failing or “bad” capacitor on a multilayer PCB is causing a partial short between layers. In many cases when a capacitor burns or degrades (often due to overvoltage, water damage, or thermal stress), the damage isn’t confined just to the component itself but can extend to the surrounding PCB material. This can result in conductive debris or burned copper that creates an unintended low-resistance (but not a perfect short) path between different layers on the board. When you measure a “partial short” in this context, you might see resistance values that are very low—often just a few ohms to a few tens of ohms—rather than an outright short (which would be near 0 ohms). For example, in a similar case on a badcaps.net thread, someone measured around 21 ohms on a power rail after carving out an internal short caused by the damaged capacitor. Such readings indicate that although the worst of the short might have been somewhat mitigated by physically removing burnt material, the board still isn’t fully operating as intended. Partial shorts like these can lead to issues such as erratic power delivery, overheating, and eventual failure of other components if not properly addressed. #fixelit #computer #computerrepair #repaired #speaker Facebook:   / fixelit   YouTube:    / ⁨@fixelit⁩   Blogspot: https://fixelit.blogspot.com