HOW TO CLEAN INSIDE & ADJUST YOUR AUTOBLOW2 4 A TIGHTER FIT скачать в хорошем качестве

HOW TO CLEAN INSIDE & ADJUST YOUR AUTOBLOW2 4 A TIGHTER FIT

Short video showing how to disassemble your autoblow2 for cleaning plus a simple way to get it to grip tighter at the base of your shaft without putting extra strain on the motor. Minor adjustment, incredible results! You could probably adjust all three but try just the one first.Gives you that little bit more of a grip that you wish it had. enjoy! UPDATE: MADE another video. Have really made some changes. 10x better then when I got it. ....I adjusted the bottom one the same way. Replaced top wire with a solid wire (no spring in front) (not sure how it could "get you" but definitely at your own risk), ****ran a wire from top row,to middle,to lower row (where the springs on front of rings are) using short pieces of rubber tubing to cover the wire. This keeps all three steady,moving together and not flopping up/down***. (DO NOT HOOK ALL ROWS TOGETHER-IT MAKES IT WORSE NOT BETTER) Added short rubber tubing over spring area to fill in the "extra" space on each row. Ideally more beads would be better. You could also put one larger bead in a/all row(s). I had one over spring in top row but it interfered with that "real doll" insert. BTW I don't recommend spending nearly 100.00 for that custom insert.It's actually too tight!, it only comes in one size and it is waaaay to thick. You can barely feel anything and the autoblow strains under the added friction or stops completely. Check out the finished version at :    • HOW TO CLEAN INSIDE & ADJUST AUTOBLOW 2 FO...   I take that back! Broke a wire so I modified it to perfection.. I'm not kidding....I've never met a girl yet that can do what the new and improved version does. If they're real nice I may come down and help them build the Autoblow 3.0. lol Modify at your own risk! Link : .    • AUTOBLOW2+ REMOD2  FINAL MODIFICATION INCR...   New video: How to repair autoblow sleeves!    • HOW TO REPAIR YOUR AUTOBLOW SILICONE SLEEV...   (Funny I said that....I'll be testing the prototype for the Autoblow 3 soon!) new new video : BRAND NEW AUTOBLOW 2 MODIFICATION TIGHTER AND ADJUSTABLE    • BRAND NEW AUTOBLOW 2 MODIFICATION TIGHTER ...   2/27/2020 UPDATE: UPDATE: Sorry for the extended delay on the Autoblow A.I. review. I wasn't allowed to disclose anything until it hit the shelves. Then I helped delay the release by 8 months. I got people half way around the world spraying a protective coating on circuit boards, CRAZY! There was an issue with a wire that was near impossible NOT to get hooked,stretched and smashed between the base and one of the base screws when inner/outer parts were combined. Not sure how much that delayed things. There were 25 prototypes. I took mine out of the box, plugged it in, turned it on an it did nothing. I gave it a little thump with my hand and it started going. It only worked 2 1/2 times. Even on those it stopped a few times. I was really excited to get a proto so that was disappointing. I completed all the questionnaires and all they asked of us. I even went above/beyond and noted a couple, possibly critical, issues as I attempted to determine why it quit working. I'm pretty good at that kind of stuff but I never have had much experience with circuit boards. Best I could determine was something was wrong with the top third of the main board. (Where the lights are). I sent photos and explained everything note worthy. Later I was told there WAS an issue with the prototype circuit boards (I don't know how many out of the 25). Anyway, since I only tried it a couple times and felt I was quite helpful as well I thought I'd get a working replacement but did not. I even asked.... I was hoping to do a detailed review so I was waiting. I'll be doing a briefer review within the next day or two. There were a couple things I didn't like right off the bat. It's possible that some things were changed since the protos but I haven't noticed anything in the photos so far. Please like & subscribe. If you subscribe you can get a notification when the review is posted. Otherwise watch for "Autoblow #3 A.I. Original Prototype Review (Finally!)" coming shortly. Rob Hack IMHO The Autoblow 2+ is the best model. Simple design and easy to modify. Be aware, some of the 2nd generation models used thinner wires/cheaper materials. If you can't bend the end of the bead wire straight, modify, then bend back without the wire breaking it's a 2nd gen. The 3rd one I got, the wire broke just straightening it. Enjoy!