Скачать с ютуб Thermo-Electric Generators! Make Electricity W/Fire! Peltier Powered! w/lots of experiments! DIY в хорошем качестве

Thermo-Electric Generators! Make Electricity W/Fire! Peltier Powered! w/lots of experiments! DIY

make electricity with fire (from the heat of a flame) using peltier technology. peltier teg/tec chips (or modules) convert "heat energy" into "electrical energy". all you have to do is setup the unit, light it up and connect the device you want to run! works great for running many low-voltage DC powered items. 🧱🧱 The Units: the video shows the 4 different designs I experimented with. several types of peltier module chips were tested and used including the 12706, the 27145 and the 12715. the final design I settled on produces power similar to the output power of "dry cell" batteries (i.e. AA, AAA, C and D cell batteries). the unit produces up to 6 volts (in 1.5v increments) and is capable of running all types of items including radios, lights, clocks, fans and most 5 volt "usb powered" items. it can also be used to charge the 3.7v batteries that are common in many of the electronic devices that we use today. 🔥 🔥 The Fuels: many different types of fuels can be used to power this unit including vegetable oil, olive oil, crisco shortening, isopropyl alcohol, ethanol fuel, glass candles, votive candles or tealights etc. also included is footage of how to make the tuna can "oil burners". (plus, how to use those for cooking if needed.) ...also, get a look at what's inside a peltier chip! details: bricks are 2"x4"x8" flat stone bricks. copper is 24 gauge 99.9% pure and highly polished. heat sinks are 200mm x 69mm x 36mm. best peltiers to use for this project are the 12706 followed by the 27145.