BMW 530i (E60) REAR BRAKES REPLACEMENT, SERVICE LIGHT RESET - DIY скачать в хорошем качестве

BMW 530i (E60) REAR BRAKES REPLACEMENT, SERVICE LIGHT RESET - DIY

As always, just a short DIY tutorial on how to change rear brake discs and pads on your BMW. This took about an hour per side, not a hard job to do in your drive way. You will need: discs and pads new wear sensor preferably new bolts, springs copper grease, silicon grease wire brush brake cleaner spray 17mm socket for the lug bolts - 120 Nm torque Hex 6mm for the set screw (dics to hub) - 16 Nm torque Hex 7mm for the slide pins - 30 Nm torque 18mm socket for the carrier bolts - 67 Nm torque torque wrench, normal wrench bungee cord to hang the calipper super solid floor jack - preferably jack stands Careful: after replacing your brakes, you need to allow some time for everything to settle. It takes 100-200 km of light braking. Try to avoid hard braking. Be careful when lifting the car up and working underneath it. It can kill you if you mess it up. I am NOT a professional, so do this at your own risk. Take care and let me know if you have any questions.