Credence FillLogic-4000 Auto Filling System скачать в хорошем качестве

Credence FillLogic-4000 Auto Filling System

Credence FillLogic-4000 is the most productive Cartridge Filling Machine on the market today. Credence FillLogic-4000 will fill up to 3,600 - 1.0 gr and up to 4,000 - 1/2 gr cartridges per hour.  That's ~28,800 - 1.0 gr and ~24,000 - 1/2 gr per DAY! Credence FillLogic-4000 will accept any cartridge, disposable, AIO and Pod in the original foam tray. The total array must fit within a 6.188” X by 4.96” Y total space. Credence FillLogic-4000 has the Credence Pump, which is the most precise and fastest delivery system available. Credence FillLogic-4000 has the NEW Credence APR (Automatic Product Recognition) which utilizes a custom product alignment tray that is sensed by the system. Credence FillLogic-4000 senses which of your products has been inserted into the elevator assembly and it automatically sets the process parameters for that product. Credence FillLogic-4000 then sets the XY start point, the X Step, the Y step, the number of rows and columns, the Z start point, the Vessel Temperature, the pump temperature, the pump motor speed, the number of pump revolutions, the line temperature and the needle heater temperature. Credence FillLogic-4000 has full temperature control through the oil path. The Vessel, the Pump, the Flexible Line to the Needle. The Needles are all independently temperature controlled for the toughest oils. The XY Motion is a proven design and will give long service with minimal maintenance and downtime. Credence FillLogic-4000 moves the needle assembly, instead of moving the bulky tray of carts to each position like most array fillers, which is a much lighter load. This keeps the motion load consistent, whereas other array fillers move the Cartridge array, which continually increases in mass as the carts are filled. Another innovation of the Credence ACFS-FillLogic-4000 is that affects its speed is the Needle Z motion where the needle will move down and up in 1/3 of a second total. The needle motion is ½ of the total cycle time so it must be fast if the machine cycle time will achieve a 1 second cycle time. It is designed around a fast-acting DC Gear-motor Cam Drive to insure consistent needle entry into the cartridge while clearing the cartridge quickly so the XY motion system can move the needle to the next position. The tray of devices in the factory foam base is fitted with the product specific alignment tray and is loaded onto a stepper motor driven Elevator that will set the top of the cartridges at the optimum height for filling. If you are filling cartridges, another key innovation is the Patented Credence Cart-Top Alignment tray. It holds the tops of all of the cartridges in the exact location and shields the outer rim of the cart so the needle is guided into the cart automatically. Credence Engineering, Inc has incorporated software-hardware innovations to prevent inadvertent loss of oil should a couple of conditions happen: 1) if the cartridge center tube is eccentric to the outer rim and the needle hits the center tube instead of going into the cart, the software senses the mishap and stops the pump from dispensing for that cart. The system just skips that cart and goes onto the next one without losing any production time. The position of the cart within the array is displayed on the User Interface Screen so the operator can remove that cart prior to capping. 2) We incorporated timing belt failure mechanism/sensors in the unlikely event that a belt breaks or comes loose allowing the needle position to be compromised. Should this happen, the idler tension pulley swings under a sensor that alerts the controller that a belt has failed. The controller, in turn, automatically stops the cycle before any oil is lost. An alert will be displayed on the screen telling the operator that maintenance is required. Credence FillLogic-4000 is the most sophisticated Cartridge Filling System on the market and will give you many years of productive cartridge filling. Credence also continually improves its products and will offer any new innovations to Credence FillLogic-4000 owners as they are proven. Thanks for stopping by. . . Cannabis Processing Systems cannabisprocessingsystems.com [email protected] 619.985.9390