How to Replace Front Control Arms with Ball Joint 2014-2020 Nissan Rogue скачать в хорошем качестве

How to Replace Front Control Arms with Ball Joint 2014-2020 Nissan Rogue

Buy Now! New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK06561 New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00917 New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00918 This video shows you how to install new front control arms with ball joint from TRQ on your 2014-2020 Nissan Rogue. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2016 Nissan Rogue SL 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2014 Nissan Rogue 2015 Nissan Rogue 2016 Nissan Rogue 2017 Nissan Rogue 2018 Nissan Rogue 2019 Nissan Rogue 2020 Nissan Rogue Tools you will need: • Phillips Head Screwdriver • Pry Bar https://trq.video/oay3-1AXAA00020 • 18mm Wrench • 18mm Socket • 21mm Socket • Ratchet • Swivel • Torque Wrench https://trq.video/ob6L-1AXAA00044 • Gloves https://trq.video/ocJd-1AXSS00048 • Safety Glasses • Floor Jack • Hammer • Jack Stands • Pole Jack • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Nissan Rogue 2nd Generation 2014-2020:    • Nissan Rogue 2nd Generation 2014-2020   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.