Building a Pump It Up Arcade MK9 v1 or v2 Main Logic Board скачать в хорошем качестве

Building a Pump It Up Arcade MK9 v1 or v2 Main Logic Board

Support the channel - https://www.buymeacoffee.com/s34nvideos If anything in this video in incomplete, check out the blog post for the latest information here: http://s34nvideo.blogspot.com/2021/10... Want to build an MK6? See here: https://s34nvideo.blogspot.com/2016/0... [What Games are supported on the MK9?] Pump It Up Pro Pump It Up NX2 (NX2 v1.54 for example throws a kernel panic on some MK9s, however, it works for others. Your mileage may vary.) Pump It Up NX Absolute (Support for NXA can also vary.) Pump It Up Pro 2 (Using an MK9 will render the 3D arrow graphics on Pro 2! An MK6 cannot do this.) Pump It Up Fiesta Pump It Up Jump! Pump It Up Fiesta EX Pump It Up Fiesta 2 Pump It Up Infinity Pump It Up PRIME Pump It Up PRIME 2 Pump It Up XX *** *** Runs in HD mode ONLY. SD mode is now unsupported as of XX's release. Any input physical connector type is ok (I.e. HDMI, DVI, VGA), but monitor MUST support 720p or higher and GPU must pump out a HD signal. [MK9v1] The MK9v1 was first shipped DURING the release of Pro1/NX2 (Late 2007-2008). At the time, NX2/Pro machines had either: MK6 or MK9 hardware. There isn't much sense in building an MK9v1 (It doesn't have any advantages over the Mk9v2 board.). Motherboard/s: Gigabyte GA-945GZM-S2 / Gigabyte GA-945GCM-S2L / MK9 GA-945GCM-S2C Sound Chip: 5.1 CH HD Audio (Realtek ALC888) Chipset: North Bridge: Intel® 945GZ Express Chipset | Southbridge: Intel® ICH7 RAM: (The mobo reserves RAM for PCI devices etc regardless of bitwise OS - 3145728K shows as usable even on 4GB RAM) - 4GB RAM MAX (DDR2 667/533/400 MHz) MK9v1 Graphics cards used: Geforce 7200GS (PCIe 1.0 x16 | 256MB / 512MB DDR2) Geforce 8400GS (PCIe 2.0 x16 | 512MB / 1GB DDR3) [MK9v2] Motherboard: Asrock G41M-S3 - https://www.asrock.com/mb/Intel/g41m-... Motherboard: Asrock G41C-GS (Should also work) - https://www.asrock.com/mb/intel/g41c-gs/ BEST CPU: See here: https://www.cpubenchmark.net/socketTy... Socket 775 (LGA 775 / Socket T) Supports FSB 1333/1066/800/533 MHz Sound Chip: 5.1 CH HD Audio (Realtek ALC662) Chipset: Northbridge: Intel® G41 | Southbridge: Intel® ICH7 RAM: 8GB RAM MAX (DDR3 DIMM 1333(OC)/1066/800 non-ECC, un-buffered memory) IO: Official USB PIUIO and JAMMA Interface Security: A USB security dongle (except for the Pro series). MK9v2 Graphics cards used: Nvidia Geforce 9300GS (PCIe 2.0 x16 | 512MB DDR2) NVIDIA GeForce 210 1GB (PCIe 2.0 x16 | 1GB | DDR3) [COMPATIBLE PARTS LIST for the BEST MK9v2 UPGRADE] Here is a list of compatible parts in order to obtain the BEST upgrade when building an MK9v2 main board. Motherboard: Asrock G41M-S3 or Asrock G41C-GS Processor: Socket 775 - 3.2 GHz, 12 MB L2 Cache, 1333 MHz FSB (MAX on both boards) BEST CPU: See here: https://www.cpubenchmark.net/socketTy... BEST CPU vs Availability: Intel Xeon X3370 @ 3.00GHz / Intel Core2 Quad Q9650 @ 3.00GHz RAM: 8GB RAM MAX (DDR3 DIMM 1333(OC)/1066/800 non-ECC, un-buffered memory) - MAX RAM SETUP on both boards Video Card: NVIDIA GeForce 210 1GB (PCIe 2.0 x16 | 1GB | DDR3) (Low Profile Preferred to fit in case - Not Essential). Any memory (128mb, 256mb etc), any manufacturer (Pny etc) and any output type (VGA, DVI etc) will work. Game Graphics Card Support Not ALL MK9 mixes will work with all supported graphics cards. See the list below for compatibility options. To have the BEST compatibility, an NVIDIA GeForce 8400GS or 9300GS is recommended. NVIDIA GeForce 7200GS (NX2 to Prime 2) NVIDIA GeForce 8400GS (??? to XX) NVIDIA GeForce 9300GS (??? to XX) NVIDIA GeForce 210 (Fiesta to XX) NVIDIA GeForce GT 610 (Prime 2 - XX) NVIDIA GeForce GT 710 (Prime 2 - XX) [EMULATION] Of course, if you are ONLY interested in building a system for emulation (Running Stepmania, StepF2, StepPrime, Stepmania etc), then there is really no point spending more money on official MK9 hardware. You would be better off buying something current as it would be not only easier to find, but also cheaper. Again, you will not be limited by the limitation imposed by old motherboards and such. It's also probably the cheapest option! You would just need to purchase a J-PAC / barr.io / STAC board (or something similar) to get your computer to "talk" with the arcade cabinet. The J-PAC, for example, would be a replacement for BOTH the PIUIO AND the PIU JAMMA Interface parts. #PumpItUp #MK9 #Andamiro Video Title: Building a Pump It Up Arcade MK9 v1 or v2 Main Logic Board Video File Created Date: Thursday, 11 November, 2021 (Video may or may not have been captured on this date, it shows the date the video was last converted.) -- Video uploaded and managed using YouTube Bulk Uploader for the Lazy! -- Manage and Auto-Tag your YouTube videos offline... Then upload! -- http://ginkosolutions.com/youtube-bul... -- GinkoSolutions.com