Testing the Amiga Pistorm Framethrower on The Amiga 2000 EATX скачать в хорошем качестве

Testing the Amiga Pistorm Framethrower on The Amiga 2000 EATX

Testing the Amiga Pistorm Framethrower. Very easy install. Install the Denise on top of the Framethrower. Connect the camera cable from your Pistorm to your Framethrower. Reinstall the PCB following the notch on the Denise chip. Add a few parameters to cmdline.txt in the boot folder of EMU68. Make sure your computer is off and or unplugged while installing the Framethrower and arranging your chipset. unicam.boot unicam.interger and reboot. No driver necessary. No changes to P96 settings. It just switches to Native mode on the fly. You can also set your HDMI output to 50hz for PAL in your config.txt (not necessary unless you are having flickering or video glitches). You need to have a PAL compatible Agnus for these settings. Also make sure your monitor is PAL compatible. Most HDMI monitors are already compatible. for 50hz PAL 720p ADD disable_overscan=1 hdmi_group=1 hdmi_mode=19 for 50hz PAL 1080P ADD disable_overscan=1 hdmi_group=1 hdmi_mode=31 If you need you can comment out any other video lines by using # at the beginning of the line to disable that line. Where to buy when available - Framethrower - https://shop.leapmaker.com/single.php... Other great Accessories Amiga 1200 White Honeycomb Trapdoor - https://www.ebay.com/itm/157442698235 Xarcade2TV-XR - https://vintagedigitalgaming.com/prod...