How to Replace Front Lower Control Arm 2008-2012 Honda Accord скачать в хорошем качестве

How to Replace Front Lower Control Arm 2008-2012 Honda Accord

Buy Now! New Control Arm from 1AAuto.com https://trq.video/ia-1ASLF00639 This video shows you how to install new control arms in your 2008-2012 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle. This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles: 2008 Honda Accord 2009 Honda Accord 2010 Honda Accord 2011 Honda Accord 2012 Honda Accord Tools you will need: • Pry Bar https://trq.video/ooi-1AXAA00020 • 14mm Wrench https://trq.video/ooX-1AXAA00010 • 17mm Wrench https://trq.video/ooX-1AXAA00010 • 17mm Socket https://trq.video/oUR-1AXAA00015 • 19mm Socket • Locking Pliers https://trq.video/oc9-1AXAA00139 • Pliers • Side Cutters • Ratchet https://trq.video/oZo-1AXAA00016 • Socket Extensions https://trq.video/oUR-1AXAA00015 • Torque Wrench https://trq.video/oCW-1AXAA00044 • Rust Penetrant • Floor Jack https://trq.video/oqF-1AXAA00068 • Hammer • Jack Stands https://trq.video/opb-1AXAA00065 • Pick https://trq.video/okW-1AXAA00037 • Rubber Mallet • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.