Garrison's Hammerhead™ Aluminum Flood-Log Barrier | Inside Post Mount Installation Video скачать в хорошем качестве

Garrison's Hammerhead™ Aluminum Flood-Log Barrier | Inside Post Mount Installation Video

When looking for an Aluminum Flood Barrier System it is important to find a flood control system that is significantly durable, easy to use, and fits your desired protection area. One of the benefits of an Aluminum Flood-Log Protection System is the ability to withstand rising water levels as a result of hurricanes, heavy rain, storm surges, king tides and flash flooding. In this Hammerhead™ Installation Video Series we will provide step by step installation guides highlighting key points and features associated with proper installation, maintenance and use. HOW TO INSTALL THE HAMMERHEAD™ ALUMINUM FLOOD BARRIER INSIDE MOUNT POST | VIDEO Align posts, so that the outside neoprene seal is positioned between the aluminum post and the opening frame. The posts should be positioned such that the plank tightening bolts are facing outwards, towards the water. It is also possible to install the posts with the tightening bolts facing towards the inside of the opening (dry side), as long as you ensure that there is enough clearance to screw down the plank tightening bolts from the inside. Mounting Post should anchored to cinderblock, masonry or concrete. If your wall is of questionable quality, such as cinderblock or old bricks, you may want to purchase double expansion anchors to use in place of the included expansion bolts. You may also wish to initially drill a smaller receiver hole, into which you place the bolt, to ensure a snug fit. When installing posts on hollow walls, you will need to purchase butterfly bolts that will expand in the opening and provide a more secure hold. Chapters: 0:00 - Hammerhead Aluminum Flood Barrier - Inside Post Mount Installation Intro 0:13 - Step 1 - Additional Materials Needed for Installation 0:17 - Step 2 - Installing the Inside Mount Post 0:39 - Step 3 - Drilling Mounting Holes 1:00 - Step 4 - Applying Silicone to the Back of the Inside Post Mount 1:14 - Step 5 - Expansion Bolts 1:27 - Step 6 - Set with a Hex Driver or Ratchet Set 1:34 - Step 7 - Apply Silicone to Fill Any Cracks or Holes and Along Inside Post Mount Seam and Wall Learn more about the Hammerhead™ Aluminum Plank Flood Barrier System, how it works and why Garrison’s Hammerhead™ Flood Control System is the right flood wall choice to protect your building, residence, or facility against all types of flooding. Contact us to assist in your flood planning! https://www.garrisonflood.com/flood-p... https://www.garrisonflood.com/install... www.garrisonflood.com sales@garrisonflood.com 929-299-2099