Swann NVR-8580 Setup Wizard - Initial Setup, firmware version 8.x скачать в хорошем качестве

Swann NVR-8580 Setup Wizard - Initial Setup, firmware version 8.x

Video script: Let’s go through the initial setup wizard for the NVR, and become acquainted with the Live view icons and controls. Before you begin, ensure that: • You’ve completed the steps outlined in the previous segment “NVR Quick Start Guide” • You can access your router • Your NVR is connected to a display and the Wizard is shown on screen • You have a computer with internet access to create a new e-mail account When you first boot the NVR, it will ask you to select a language. Select a language, and then select next. Enter a new password with a minimum of 6 characters, and then confirm the password. You can use the shift key to select between upper and lower case. Don’t forget to write down your password. Now, select “Next” to proceed. Then, confirm your language choice. Now, select the correct video format for your region. Then, select the appropriate resolution for your TV. 1920 x 1080 will suit most televisions. If your TV supports 4k, choose from 2k, or 4k to take advantage of a higher resolution stream. Now, select the appropriate time zone for your region. Then, select your preferred date format. Next, select your preferred time format. Now, give your Swann recorder a relevant name, or leave it as is. The P.2.P. Id and QR code are unique identifiers for your NVR. You can scan the QR code on screen, or on your NVR when configuring the Swann Security app for easy set-up. Select “next” to continue. Now, you can choose to change the camera names, or leave them as is. Select next to continue. Your NVR requires a free G-mail or Outlook e-mail address to send alerts and facilitate password reset requests. We recommend creating an account devoted to your NVR. We’ll show the example using a G-mail account, and show the settings for the alternate account types on screen so you can follow along. In the “Email” field, select enable. Leave the “encryption” field as is. In the “SMTP port” field, input 00587 In the SMTP Server field enter smtp.gmail.com In the “User Name” field, enter the e-mail accounts user name. Do not use the settings shown on screen here, use your own email accounts credentials. In the “Password” field, enter the e-mail accounts password. Do not use the settings shown on screen here, use your own email accounts credentials. In the “Sender” field, enter a name you wish notifications to be addressed from Do not use the settings shown on screen here, use your own email accounts credentials. In the “Receiver” field, select an e-mail to send notifications to Do not use the settings shown on screen here, use your own email accounts credentials. In the “interval” field, select the amount of time that must elapse before another alert will be generated. Now, select “Test e-mail”. If the test is successful, you will receive a notification on screen. Now, check your inbox to ensure the test email was received. If it’s not in the inbox, make sure to check the spam and junk folders. If you received an error, ensure that you’ve entered the correct email address and password, and check all your cables and connections. Then check the back of the NVR to ensure the LEDs above the Ethernet port are flashing. If not, unplug and re-plug the cable. You may also want to try a different port on your router. Also, check your e-mail settings to ensure “Access for less secure apps” is enabled. After receiving a successful test notification, select “Next” to continue. Then, select “Update Now” Select “Next” to continue. Then, in the “DST” filed, select “enable” if you wish to apply Daylight Savings time. In the “Time Offset” field, select the amount of time that Daylight Savings time is increased in your time zone. In the “start /end time” fields select when daylight savings time starts and ends. Now, select “save, and then “ok”. If you changed the video resolution during the wizard, select “ok”, to apply the setting. Congratulations! Your NVR is now ready to record video upon motion detection, send email alerts when an event has occurred, and is ready to connect to the Swann Security app.