Скачать с ютуб How to Setup Tubeless Tyres - 1. Rim Tape в хорошем качестве

How to Setup Tubeless Tyres - 1. Rim Tape

Next step... Step 2. Valves:    • How to Setup Tubeless Tyres - 2. Valves   Buy now: https://peatys.co.uk/products/rim-tape First remove the tyre and tube then pull the existing old rim tape off the wheel. Now thoroughly clean your rim inside and out with Peaty’s Disc Brake Cleaner for dirt and greases or Peaty’s XXX Solvent Degreaser for any glue residue. Once all dirt and grease has been removed make sure you give the wheel a good wash with clean water again to remove any residual disc cleaner or degreaser as this will weaken the glue on the rim tape. Now, with a completely dry rim, take your Peaty’s Tubeless Rim Tape and start applying it from two spoke holes beyond the valve hole to create an overlap when it’s finished. Stretch the tape slightly so there are no wrinkles and use your thumb to smooth the tape into any ridges or creases on the rim so there are no air bubbles. Continue carefully all round the rim until the tape is two spoke holes past the valve hole to create that overlap. Cut the end at a slight angle, smooth out any air bubbles and then use the separate piece of sealing tape to make sure the end doesn’t peel up. Do a final check for air bubbles, pushing any trapped pockets to the nearest spoke hole to get them out. Subscribe:    / @peatys   Follow us on Instagram:   / peatysproducts   Follow us on Facebook:   / peatysproducts