The Why and the How!!!!! N2itive Rear Camber and Toe Arms (2012 - 2020 Tesla Model S and X) скачать в хорошем качестве

The Why and the How!!!!! N2itive Rear Camber and Toe Arms (2012 - 2020 Tesla Model S and X)

https://zevcentric.com/collections/mo... The best and easiest to way to reduce inside tire wear on the Model X and S 2012 to 2020 Model Years. 0:00 Introduction 1:30 Installation Guide for rear N2itve camber and toe arms 1:34 Remove OEM height sensor link 2:06 Removal of rear OEM Camber Arm Loosen 15mm bolt 2:32 Remove the 15mm bolt from the knuckle 2:39 Remove the 18mm bolt from the subframe side 2:48 Remove the OEM camber arm 3:03 Install N2itive camber arm 3:12 Thread 15mm bolt on the knuckle 3:31 Reinstall the oem 18mm bolt and thread on the nut 3:53 Install height sensor link (OEM or lowering link) 4:10 Removal of OEM toe arm Loosen 18mm nut & bolt 4:23 Loosen toe bolt on the subframe side. 18mm bolt, 19mm nut bolt will be cut off 4:44 Remove toe bolt from knuckle 4:53 Secure toe arm to cut the bolt 5:02 Toe bolt will need to be cut due to it hitting the subframe Bolt will be replaced with provided hardware 5:25 Cut OEM bolt 5:57 Use pry bar to snap the bolt then remove 6:10 Remove OEM arm 6:16 Installation of N2itive toe arm 7:12 Install N2itive toe arm 7:41 Fasten with provided hardware 8:30 Fasten toe arm to the knuckle with OEM hardware 8:44 Jack control arm to driving height 9:10 Snug all the bolts for torquing 10:09 Torque the bolts 10:49 You have completed the installation of N2itvite Adjustable Camber & Toe Arm