Hummer H3 - sunroof repair, broken ribbon and missing motor скачать в хорошем качестве

Hummer H3 - sunroof repair, broken ribbon and missing motor

I was told on purchasing my H3 that the sunroof didn't open. I planned to fix that, one day.. a year and a half later, it opens again! Hummer H3 service manual for sun roofs: https://schwarttzy.com/wp-content/upl... Hummer H3 sunroof toothed ribbon: https://www.amazon.ca/dp/B0CZ3TGS1M?r... --- from the manual: SUNROOF MOTOR/ACTUATOR INITIALIZATION/TEACH PROCESS Perform the initialization/teach procedure any time: A new sunroof motor/actuator has been installed. The existing sunroof motor/actuator has been removed and reinstalled. The sunroof system has suffered 3 interruptions for emergency events, i.e. anti-pinch, debris in tracks etc., and normal operation is canceled. By performing the initialization/teach procedure, the sunroof motor/actuator records the open vent stop position. The motor/actuator will then understand the other positions, closed and full open soft stop, and allow express and obstacle detection functions. 1. Ensure that all electrical harness connectors are connected. 2. Turn the ignition to ON. 3. Completely close the sunroof window with the manual close switch. 4. Press the sunroof vent switch to the vent open position until the sunroof window stops, and continue holding the switch for at least 10 seconds. --- Content: 0:00 - In the beginning 2:42 - troubleshooting 11:50 - removal assembly 16:02 - troubleshooting 19:20 - disassembly 20:03 - fixing ribbon 25:29 - reinstall 26:22 - testing 28:23 - calibration