F 4E Phantom скачать в хорошем качестве

F 4E Phantom

STL- https://fab365.net/items/2392 STL-   / f-4e-phantom-ii-147071044   Get commercial license and download newest models cheaply-   / goodesign   You’ve waited a very long time, and I’m happy to finally say it’s here — I have completed the F-4E Phantom II for 3D printing. ✈️ As always, this model was designed with a strong focus on maximum detail while keeping assembly as simple and enjoyable as possible. For the final print, I spent a lot of time thinking about colors. The most well-known camouflage schemes are difficult to reproduce cleanly with 3D printing, so I chose to print the model in a clean light gray, which highlights the shape and details beautifully. Key Features Openable and lockable canopies The rear of each canopy can be gently pressed under the frame to hold it in place. Please watch the video carefully to see how this works. Fully movable wing flaps All wing flaps are articulated. If the hinge feels too tight, lightly shave it with a knife before inserting. If it feels too loose, slightly increasing the hinge scale when printing will solve the issue. Assembly Notes When installing the canopies, rotate them sideways first, then twist gently to insert them easily. The horizontal stabilizers are designed to be slightly tight. Rotate and twist them several times while aligning the angle, and they will fit snugly against the fuselage. Other than these points, assembly is straightforward, and anyone who has built my previous designs should have no trouble at all. For detailed assembly guidance, please refer to the assembly video. I’ll be releasing the weapons set and display stand very soon, so please look forward to those as well! I truly hope this model brings you the satisfaction worthy of the long wait. Largest part in printing, size = X 194mm, Y 46mm, Z 157mm, After full assembly size= X 267mm, Y 404mm, Z 112mm 1 : 48 scale Total Build Time : 58h / Plastic Weight : 240g