etrailer | Review of Fill-Rite Fuel Transfer Pump - 115V AC Power Fuel Transfer Pump - FR85XQ скачать в хорошем качестве

etrailer | Review of Fill-Rite Fuel Transfer Pump - 115V AC Power Fuel Transfer Pump - FR85XQ

Click for more info and reviews of this Fill-Rite Fuel Transfer Pump: https://www.etrailer.com/Fuel-Transfe... Check out some similar Fuel Transfer Pump options: https://www.etrailer.com/dept-pg-Fuel... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Fill... Hi everybody. Andy here with etrailer. Let's take a quick look together at this Fill Rite 115 volt AC power fuel transfer pump. This is a stationary fuel transfer pump that's designed for above ground tanks, where you already have access to standard 115 volt AC power. This runs on a reliable rotary vein motor that's going to be thermally protected, so this is going to automatically prevent overheating during normal use. Now this is gonna be ideal for farms, small fleets, maintenance shops and facilities that fuel equipment on site and want a durable, reliable setup, rather than a portable pump. This is gonna be best for those who have a permanent tank and again, access to that 115 volt power and plan to use it on a regular basis. The pump itself is very tough, very rugged, cast iron construction, and this is going to mount easily to a standard two inch tank bung, and this is sized just right for a 20 to 80 gallon tank, delivering fuel at a solid 20 gallons per minute. So that's going to be fast enough without being overkill. So this comes with most of what you need to get the fuel moving right away. This includes this 12 foot long, three quarter of an inch diameter hose and the hose has a static ground wire and it also has this manual cast aluminum nozzle, and then it has this boot here, where you can just store that at, so that's really convenient as well. There's also a built-in mesh strainer to catch larger debris before it reaches your equipment. But one thing you need to know up front is you will need to source and cut your own suction pipe to match your specific tank setup. That's pretty standard for stationary pumps, but it is something to plan for. As far as compatibility goes, this is very flexible. This is gonna work with diesel, gasoline, ethanol blends up to E15, biodiesel up to B20, kerosene and several common solvents, like mineral spirits and heptane. A few things to keep in mind. This is rated for a 30 minute on and 30 minute off-duty cycle. This has a maximum operating pressure of 23 PSI and it should be wired by a licensed electrician for safety and compliance. Giving you some overall measurements here, just simply end to end. It's gonna be roughly about 14 and a quarter inches long, and then the width, right at about 10 and seven eighth inches wide, and the height, about 16 and a quarter inches tall. Again, this includes everything that you see here. We do have meters available from Fill Rite as well if you're interested in taking a look at those meters that we sold separately, if that's something that would be helpful to you. But this is gonna be a durable, no nonsense pump that's meant for those who want a dependable AC powered solution for stationary fuel transfer. Without stepping up to a heavy commercial system. If you happen to have any other questions, whether it's about this or anything that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy, thank you for joining me.