How to Replace Front Brakes 2010-2013 Kia Forte Koup 2.4L L4 скачать в хорошем качестве

How to Replace Front Brakes 2010-2013 Kia Forte Koup 2.4L L4

Buy Now! New Brake Pads from 1AAuto.com https://trq.video/ia-1ABPS02890 New Brake Rotor Set from 1AAuto.com https://trq.video/ic-1APBR01095 New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ia-1APBS00836 This video shows you how to install new, quality TRQ brake pads and rotors on your 2010-2013 Kia Forte Koup 2.4L L4. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. Estimated installation time for a professional technician is approximately: 54 minutes This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles: 2010 Kia Forte Koup 2011 Kia Forte Koup 2012 Kia Forte Koup 2013 Kia Forte Koup Tools you will need: • Phillips Head Screwdriver • Pry Bar https://trq.video/oagc-1AXAA00020 • 14mm Socket • 17mm Socket • 21mm Socket • Brake Caliper Hanger https://trq.video/ooE-1AXAA00439 • Trim Tool Set https://trq.video/oaIy-1AXXX00006 • Socket Driver • Socket Extensions • Torque Wrench https://trq.video/obur-1AXAA00044 • Copper Anti-Seize • Paper Towels • Silicone Paste • Hammer • Jack Stands • Pick https://trq.video/oabq-1AXAA00037 • Wheel Chocks • Wire Brush https://trq.video/oAV-1AXAA00079 Subscribe:    / @trq   Check out our playlist: Kia Forte 1st Generation 2010-2013:    • Kia Forte 1st Generation 2010-2013   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.