Mid Century Modern Lounge Chair ***UPDATED PLANS AVAILABLE*** follow link! скачать в хорошем качестве

Mid Century Modern Lounge Chair ***UPDATED PLANS AVAILABLE*** follow link!

PLANS AVAILABLE: https://www.mollywollywoodworking.com... Follow along on how I built his mid century modern lounge chair! This is a build that I have been wanting to do for a long time, I am so glad that I finally got around to, I couldn't be happier with the results. Plans for these chairs are hard to come by so I will leave as many dimensions as I can below to maybe help someone out who is interested in making their own. Front Leg: 15 degree inward splay. Total length is 22" (should have made it larger). There is a taper from 2.75" at the top down to 1.25" at the bottom. The joint nearest the ground is cut at 90 degree from ground level, makes the glue up a lot easier. The bottom of this joint is 7.5" up from the ground, should have made this 10-11" instead to make the seat higher up off the ground. The top joint is cut at 3 degrees so that there is a downward angle for the arm rest. Back Leg: 15 degree inward splay as well. Total height is 31". The piece above the top joint that is going back outward I should have made more upright, I can't remember exactly what the angle is, but it would have made the chair seat a little less of an angle. The bottom joint, again is cut at 90 from the ground, and 7.5" up from the ground. I should have made this more like 10-11" to give the chair a little more height. Total Dimensions: 38" from leg to leg in depth. Seat depth is 21.5", seat width is 24". Back rest is 23.5" high and 24" wide. These dimensions seem really nice to sit on, and allows me to add 3" thick cushions without losing space. If you have any questions please leave a comment or follow me on instagram @mollywollywoodworking