(32:9) 5120x1440 : 9800X3D (D15S + Noctua NF-A14x25r G2 @1050rpm) + RTX 5090 FE (575W) Torture Test скачать в хорошем качестве

(32:9) 5120x1440 : 9800X3D (D15S + Noctua NF-A14x25r G2 @1050rpm) + RTX 5090 FE (575W) Torture Test

The first test with the Noctua NF-A14x25r G2 was a bit underwhelming due to too hot CPU temperature. Thus I decided to setup my NF-A14x25r G2 @1050rpm instead of 900rpm. By doing that, the fan is capable to improve its cool air intake from the rear! Even at that speed the NF-A14x25r G2 is quieter than the original NF-A15. For the results, keep in mind, I chained the 2 torture tests in a raw...despite that my build achieved pretty good results : ---RTX 5090 FE was within the 73°C (pretty the same at 900rpm) ---R7 9800 X3D was within the 68°C (way better compared to 900 rpm, 73°C) SSDs temperatures are the same. As a summary : Sliger Cerberus-X :    • (32:9) 5120x1440 : Cerberus-X :  9800X3D +...   NCase FormD T1 :    • (32:9) 5120x1440 : FormD T1 :  12600K + RT...   Sliger S620 (R9 7945HX) :    • (32:9) 5120x1440 : R9 7945HX + RTX 5090 FE...   Sliger S620 (R7 9800X3D+IS67XT) :    • (32:9) 5120x1440 : 9800X3D (IS-67XT) + RTX...   Sliger S620 (R7 9800X3D+D15S+Noctua NF-A15) :    • (32:9) 5120x1440 : 9800X3D (D15S) + RTX 50...   Sliger S620 (R7 9800X3D+D15S+Noctua NF-A14x25r G2 @900rpm) :    • (32:9) 5120x1440 : 9800X3D (D15S + Noctua ...   Here is the setup Case : Sliger S620, desktop-horizontal orientation Motherboard : Asus X870i CPU : AMD R7 9800X3D (CO -14) RAM : Corsair Vengeance 2x24Go DDR5 7600 MTS CL3 6 (DOCP I profile) CPU Cooler : Noctua D15S Chromax + Offset -7mm (NM-AMB12) with reverse flow (intake from the rear) RTX 5090 FE : Stock settings (575W TDP) SSD #1 : Samsung 9100 Pro 2To (Slot 1 gen5) SSD #2 : WD SN850X 2To (Slot 2 gen4) Bottom Fans : 2xFractal Design HP-12 (intake ~1000rpm) Side Fans : 1xNoctua NFA12x25 Chromax (Exhaust ~1400rpm) Custom fan curve : Yes ("Fan control" Software), Chipset/VRAM fans left to standard bios settings Nvidia drivers : 591.59 Ambient temperature : 23°C Build Log : https://smallformfactor.net/forum/thr...