How to Clean a Rug Doctor Carpet Cleaning Machine скачать в хорошем качестве

How to Clean a Rug Doctor Carpet Cleaning Machine

How to clean the Rug Doctor machine before returning to store. If you have any cleaning solution left in the lower red tank when you have finished your cleaning, this can be emptied by taking the machine outside and switching it to 'hand tool on'. Note, the machine needs to be plugged into power. Any remaining fluid will drain out underneath the machine. Once the water stops running out, turn the machine off. Alternatively, unplug the machine. Remove the white bucket and tip the machine forward and upside down. Unplug the machine before cleaning. Do not spray or immerse the machine and water. Remove the filter by pushing the spring against the clear plastic wall of the dome. Clean inside the clear dome. Make sure the dome filter is not clogged with excessive fluff. Remove any fluff or debris that is clogging the outside of the filter. If necessary, run the filter under a tap. Remove any other debris. Then refit the filter into the clear dome. Rinse out the white upper tank. Use a coat hanger or long thin instrument to hook out any carpet debris if clogging, vacuum nozzle. Wipe underneath machine with a damp cloth and using a rubber glove, clean fluff off the vibrating brushes. If you have any questions, please call our customer services team on 0800 800 245 or read through the support documentation at https://www.rugdoctor.co.nz/support/ Video Shortcuts: 0:03 - Emptying remaining solution from machine 0:35 - Do not spray or immerse the machine in water 0:38 - Cleaning inside clear dome and filter 0:59 - Rinse out the white waste tank 1:03 - Cleaning underneath the machine 1:19 - Contact the customer services line on 0800 800 245