etrailer | Review of Bulldog Winch Dual Air Pressure Gauge and Switch - BDW83SV скачать в хорошем качестве

etrailer | Review of Bulldog Winch Dual Air Pressure Gauge and Switch - BDW83SV

Click for more info and reviews of this Bulldog Winch Air Bag Compressor Kit,Vehicle Suspension: https://www.etrailer.com/Accessories-... Check out some similar Air Bag Compressor Kit,Vehicle Suspension options: https://www.etrailer.com/dept-pg-Acce... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Bull... Jeff Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at the dual needle, 0 to 150 PSI air pressure gauge with the compressor switch for the Bulldog winch onboard air tanks. Now, this is a dual needle in cap gauge that'll let you monitor the pressure in two onboard Bulldog winch air tanks. Wanna zoom in up close so you can see the needles. If you notice there's a bright orange needle, then right above it is a green needle. This is an analog mechanical gauge and the gauge will also be lighted at night. Has a bulb right back here that's wired in. That way at night this will light up the perimeter of the gauge so you can see it. The gauge itself has a nice zinc plated steel construction. It's very durable and corrosion resistant. Also on the back, if you notice, there's your two brass airline connections right there. You can see all the wiring connections and they are tagged from where they get connected to. On front the rocker switch. This is what I'll let you turn on or off the on board 12 volt Bulldog winch compressor. And also at night, these on and off positions will be lighted with LEDs to make it very easy to see at night what position it's in. Now, this part does meet the IP68 specifications for water and dust resistance. Does come with the connection kits. It's two 12 foot long nylon airlines. Two sets of five piece brass connection fittings. You can see it's already mounted in this nice steel L shaped mounting bracket with the mounting hardware. And basically the bracket will install easily underneath your dash with the included hardware. The bracket has a nice textured black powder coat finish to it. It is corrosion resistant. The dimension on the bracket itself, just the mounting bracket. It's about 4 inches wide. Overall depth is about 1 3/4 inches deep. Now a few specs on this, the pressure gauge, maximum air pressure is 150 PSI. The dimension on the gauge is 2 inches in diameter. And the depth of about 3 inches deep. The compressor switch right here, the power draw on that is 20 amps at 12 volt DC. But that should do it for the review on this dual needle 0 to 150 PSI air pressure gauge with the compressor switch for your Bulldog winch onboard air tanks..