MINI F-Series Beltline Dechrome Kit Fitting Guide - SCP Automotive скачать в хорошем качестве

MINI F-Series Beltline Dechrome Kit Fitting Guide - SCP Automotive

Note: Please make sure the vehicle surface is completely clean before installation. A fitting guide for the beltline dechrome kit, available at SCP Automotive. Product Link: https://sherrattcustomparts.co.uk/sho... Recommend Tools: Heat Gun Small Blade Squeegee Fitting guide steps and their respective time stamps: 1. 0:09 - Measure the size of the beltline strip 2. 0:15 - Cut the piece that has been measured, allowing some room for error. 3. 0:23 - Leaving a slight overhang, begin applying the strip making sure the top is aligned perfectly. 4. 0:34 - Push down the beltline as you move along to apply the beltline. The vinyl tape will not stick unless pressure is applied. 5. 0:49 - Continue applying the vinyl. 6. 1:01 - On all corners apply pressure to push any fingers out of the vinyl. Pull the vinyl and reapply to avoid creases. 7. 1:25 - Any finger that you cannot push out, please use a heat gun to allow the vinyl to stretch and repeat step 6. 8. 2:01 - Heat up the vinyl and wrap over the end. 9. 2:14 - Make a crease to provide greater visibility of where to cut. 10. 2:20 - Apply pressure to the newly applied vinyl. 11. 2:27 - When the fitment is perfect us a small blade to trim at the edge, following the crease. 12. 2:33 - Peel away the excess. 2:41 - Repeat the steps shown in this guide, until the rest of the car is complete.