Amazing iPhone 6s 4400mAh extended battery, teardown, rear case installation скачать в хорошем качестве

Amazing iPhone 6s 4400mAh extended battery, teardown, rear case installation

Click "Show more" to see the entire description. 0:26 Step 1 - Remove the SIM tray 0:33 Step 2 - Loosen these screws 0:43 Step 3 - Separate the display unit using a suction cup 1:14 Step 4 - Loosen these screws and remove the battery plug bracket 1:20 Step 5 - Unplug the battery 1:26 Step 6 - Loosen these screws 1:35 Step 7 - Remove display cable bracket and unplug connectors 1:58 Step 8 - Unplug the camera 2:04 Step 9 - Loosen these screws and remove the camera 2:13 Step 10 - Remove this camera ring 2:18 Step 11 - Loosen these screws and remove connector bracket 2:25 Step 12 - Loosen these screws and remove the antenna unit 2:37 Step 13 - Unplug these connectors 2:55 Step 14 - Loosen this screw and remove NFC bracket 3:01 Step 15 - Loosen these screws 3:12 Step 16 - Remove the logic board 3:21 Step 17 - Loosen these screws and remove taptic engine 3:32 Step 18 - Remove adhesive strip and the original battery 4:01 Step 19 - Loosen this screw and remove the flash bracket 4:08 Step 20 - Lift up the flash unit 4:16 Step 21 - Loosen these screws 4:28 Step 22 - Lift up the microphone unit 4:39 Step 23 - Remove the cable assembly 4:52 Step 24 - Remove volume button covers 5:00 Step 25 - Remove the power button cover 5:05 Step 26 - Loosen these screws and remove the speaker unit 5:19 Step 27 - Loosen these screws and remove lighting assembly 5:57 Step 28 - Remove the lightning and speaker bracket 6:15 Step 29 - Loosen screws and remove display unit holding clips 6:33 Step 30 - Disassembly finished, switch to Cameron Sino case 6:37 Step 31 - Install lighting and speaker bracket 7:08 Step 32 - Install display unit holding clips 7:49 Step 33 - Put the lighting assembly in place 8:13 Step 34 - Install the microphone the bracket and tighten the screws 8:35 Step 35 - Install the speaker unit 9:00 Step 36 - Put the power and volume button covers in place 9:09 Step 37 - Install the cable assembly 9:37 Step 38 - Install flash and microphone unit 10:00 Step 39 - Apply adhesive tape on the Cameron Sino battery 11:27 Step 40 - Install taptic engine 11:35 Step 41 - Put the logic board in place and tighten these screws 12:11 Step 42 - Install the plastic clip and the NFC bracket 12:39 Step 43 - Plug the antenna cable 12:50 Step 44 - Plug the lighting connector and the audio control cable 13:09 Step 45 - Install the antenna unit 13:23 Step 46 - Remove the camera lens cover from the original case 12:31 Step 47 - Plug and install the camera unit 12:51 Step 48 - Apply adhesive and install the camera lens cover 14:49 Step 49 - Plug the display unit connectors 15:13 Step 50 - Install display unit cables bracket 15:25 Step 51 - Plug the battery connector and install the bracket 15:38 Step 52 - Install the display unit and tighten screws This is the battery for mobile, smartphone model Apple iPhone 6s View detailed descriptions here: https://www.cameronsino.com/Products/... Battery model: CS-IPH611EX Capacity: 4400mAh / 16.72Wh Volts: 3.80V Dimension: 138.30 x 67.10 x 10.00mm Warranty: 12 Months Difficulty: ★★★★☆ Do you want more video with different devices? Comment us downstairs and tell us which model you want. To know more Cameron Sino. Please follow our social media below! Website: http://www.cameronsino.com Facebook:   / cameronsino   Twitter:   / cameronsino   Instagram:   / cameronsino