Assembling and Inflating Air Floor Inflatable Sport Boat Dinghy скачать в хорошем качестве

Assembling and Inflating Air Floor Inflatable Sport Boat Dinghy

Assembling and inflating White Marlin 9.8' air floor Inflatable Sport Boat Dinghy. Find all our air flor model dinghies here: https://inflatablesportboats.com/prod... Takes us 4 minutes to inflate and assemble the whole Inflatable Sport Boat. This is why we suggest air floor models for people that need lightweight, portable, easy to assemble in minutes style boats. The foot pump will max out at about 1 PSI. We recommend .5 - 1 PSI for all chambers or until ridged. The air floor optimal pressure is 6 PSI, even though 1 PSI will be adequate for use. You will need a PSI electric pump to reach 6 PSI. Valves don't require a valve adaptor. Valves are universal inflatable boat valves. Here are recommended PSI valve adaptors: https://www.amazon.com/halkey-roberts... Few tips: 1. Valve needle pushed down counterclockwise = open 2. Valve needle clockwise and popped up = closed 3. Install the slide on bench seats before fully inflated. 4. Takes about 15 mins to fully inflate with the foot pump alone 5. Never exceed the owner's manual maximum PSI per chamber. Overinflation with an air compressorer could damage the tubes. https://inflatablesportboats.com/how-... SPORT BOAT AIR FLOOR DETAILS: Drop stitch high-pressure air deck floor. Thick PVC is designed to hold up to 8 PSI and gets rock hard providing a stable boat floor. The thick .9 mm, 1100 denier reinforced PVC material is UV, oil stain, and puncture restraint. White material protects against the sun's heat, faded material and compares to heavy-duty material used for white water river rafts. Same drop stitch technology as inflatable stand-up paddleboards.