How to pair the Multi-Mic+ with your hearing aids скачать в хорошем качестве

How to pair the Multi-Mic+ with your hearing aids

To get started with the Multi-Mic+, you need to pair it with your compatible hearing aids. Follow these steps to pair the Multi-Mic+ with you hearing aids. 1) Make sure your hearing aids and Multi-Mic+ are turned on. To turn on the Multi-Mic+, hold down the power button for approximately 1.5 seconds until the status LED turns green. 2) Place the hearing aids and Multi-Mic+ close to each other (max. distance 2 inches). Be sure to place the hearing aids to the side of the Multi-Mic+, not on top or under it. 3) Paring mode will be activated by pressing the paring button on the back of the device. Press the button until the LED starts flashing blue in short intervals. 4) The hearing aids will be paired one at the time. The LED will stop flashing and turn blue for 3 seconds to confirm successful pairng of the first hearing aid. After the first hearing aid is paired, the Multi-Mic+ will then automatically continue to pair the second hearing aid. When the second hearing aid is paired the LED will again turn blue for 3 seconds. 5) When pairing is completed for the second hearing aid, the Multi-Mic+ will search again to see if more hearing aids are within reach. When no more hearing aids are found, the Multi-Mic+ will stop pairing mode. 6) The LED will again blink green to indicate it is turned on. 7) You may now begin streaming sound from the Multi-Mic+ to your hearing aids. Multi-Mic+ is compatible with ReSound Nexia hearing aids. To find out more about ReSound hearing aids, visit https://www.resound.com.