ASI 8154 Specimen Pass-Through Cabinet скачать в хорошем качестве

ASI 8154 Specimen Pass-Through Cabinet

Please find this product at http://absupply.net This video is to bring you a closer look at the ASI 8154 Specimen Pass-Through Cabinet. This is how the front face looks like. It has white protected coating, so that what the white is. This is the side with the fixed flange and the door; has tow springs up here making the door soft closing. Satin stainless steel. On the back site is another door. Looks the same in all four sides. It will be important to take note of it's function. You've got the inside door and that will open but the fact is Specimen Pass-Through Cabinet you certainly you don't want the ability to open both doors at the same time. So as one door is open at that point you can not open the inside door, when the outside door closes only then you can open the inside door. That's standard for specimen pass through cabinet when you can't open the doors at the same time. One has got to be close for the other to open, it's very normal. How that is accomplished on the ASI 8154 is that the two latches here inside of the cabinet face and only when these latches have been broth closed by future on the inside portion of the door, this cut off portion over here, only when that door is closed will pinch the two latches and when these latches are pinched closed is the only time when the other door is open. This is the fixed flange side and the opposite side that has not have a flange, but that flange is loose and you will attache it to the inside ( the cabinet is not square, so that's what we are going to find it), so this flange will float in telescope. The telescope from an wall as thick as 1 3/4". There is a link to the Cut Sheet above this video where it gives opening dimensions, specification of what is made of. The Rough Wall Opening is 11 1/2" wide X 11" tall. The ASI box is the most popular model, typical standardize design; as you can see has that symbol indicating what it is. Screws are not provided so depends on your application you will need to provide screws and fasteners. If you have any questions regarding the ASI 8154 Specimen Pass-Through Cabinet or any other ASI product please feel free to reach out to us.