Fitting HEL Levers to an MT-07 - Radial Master Cylinder Brake Upgrade скачать в хорошем качестве

Fitting HEL Levers to an MT-07 - Radial Master Cylinder Brake Upgrade

This is a mod I have been wanting to make to my bike for years - swapping out the crappy axial master cylinder for a nice HEL radial option (I prefer V1 to V2). It has made a massive difference to the braking of the bike - I consider it an essential upgrade for the MT-07! Wish I'd done it sooner! You can find the HEL master cylinder here - https://www.helperformance.com/hel-ra... I also got a clutch perch, so the levers wouldn't be mismatched - https://www.helperformance.com/hel-so... 00:00 Intro 00:06 Remove the Stock Brake Master Cylinder (5mm Allen) 00:23 Remove the Clutch Perch (8mm Socket) 00:31 Remove Clutch Switch Connector 00:33 Remove Clutch Cable 00:38 Shot of the New Levers 00:40 Fitting the Clutch Cable to the New Perch (with HEL Spacer) 00:49 Fitting the Clutch Perch to the Handlebar (5mm Allen) 00:58 Fitting the Master Cylinder to the Handlebar (5mm Allen) 01:10 Fitting the Bleed Nipple to the Master Cylinder (10mm Spanner) 01:15 Fitting the Reservoir Spigot (16mm Socket) 01:28 Torqueing the Spigot Banjo Bolt (10Nm) 01:34 Fitting the Reservoir Pipe 01:44 Fitting the Brake Line and Brake Switch to the Master Cylinder (14mm Spanner) 02:07 Removing the Connector Block from the Brake Light Switch 02:19 Connecting Brake Light to the Loom 02:22 Testing the Brake Light 02:28 Heat Shrinking the Connector 02:35 Tidying up the Wiring 02:44 Wiring up the Clutch Switch 03:15 Heat Shrinking the Clutch Switch 03:23 Connecting the Clutch Switch 03:31 Tidying up the Wiring 03:37 Checking Bar Movement for Tight Spots - All Good 03:49 Shots of the Levers Fitted to the Bike