Designing Your First 3D Printed Parts | Basic TinkerCAD 3D Printing скачать в хорошем качестве

Designing Your First 3D Printed Parts | Basic TinkerCAD 3D Printing

It is time to take your 3D printing to the next level and create your own designs. The steps are simple, and the process is easier than you are expecting. I am using the free software TinkerCAD for modeling. There are 4 basic steps of creating your own prints. First you need to think of what you want to make. This may sound basic, but it is a very important step. I am starting with some functional designs that will help around the house. I wouldn't start too advanced for your first design. That way you won't get discouraged. Second it sketching and measuring. Digital Calipers are cheap and make this step really easy. Also, don't over think your sketch. These don't have to be pretty, just so you can understand what you wanted to create. Third is 3d modeling of your sketches. I am using TinkerCAD, because it is really powerful and makes basic designs easily once you get a hang of it. I would recommend skipping fusion360 because even a design as simple as this would have been so much harder in fusion360, but took 5 minutes in TinkerCAD. The Fourth Step is printing, and I would recommend printing at a prototype quality. That means weaker and faster than you normally would, because your first design might not work. ‪@BROBOTICXINDIA‬