Cyclone Effect Adapter and Legs Parkside PASA 1200 B2 Dust Chip Extractor скачать в хорошем качестве

Cyclone Effect Adapter and Legs Parkside PASA 1200 B2 Dust Chip Extractor

You can buy the 3D model here: https://cults3d.com/en/3d-model/tool/... https://cults3d.com/en/3d-model/tool/... I designed an adapter to divert the inlet flow to keep all the air and dust from depositing directly on the filter. This will achieve a partial cyclone effect inside the barrel. The adapter can be mounted without damaging the metal barrel by drilling new holes. The adapter can be removed at any time. It is designed so that it does not reduce the suction power of the vacuum cleaner and larger pieces of machining waste can be sucked in. At the same time, I didn't like the fact that the metal barrel scrapes on the floor, the paint finish on the rim hem gets worn off, and the barrel can corrode. I designed simple feet that could be attached without drilling holes in the metal barrel and damaging it. They are attached to the rim of the bottom edge of the barrel and held on with double sided tape so they don't fall off when lifted.