Team-Encoder's Blitzmas - An Installation Guide by THE-ADM - Full Softmod Walk Through скачать в хорошем качестве

Team-Encoder's Blitzmas - An Installation Guide by THE-ADM - Full Softmod Walk Through

A full walk through of Team-Encoder's Blitzmas modification for NFL Blitz cabinets by Arcade1Up. Please read bottom of comments for updated Blitzmas pack. Follow these instructions to install Blitzmas: Chapters: 00:14 Remove power cord from the PCB on the back of the cabinet. 00:46 Switch flash switch to "OFF" Position 01:06 Download and launch the MysteryBlitzmas software on your PC. 03:01 While the application is open and waiting for the PCB to be connected, insert the USB cable to the PCB and PC. 03:33 Insert the power cable back into the PCB 03:52 Turn on the cabinet using the on switch 04:06 Press the install button to flash the PCB and wait till it reaches 100%. 04:51 Wait 2 minutes or so, and turn your cabinet off, and restore the flash switch to the "ON" position. 05:10 Prepare the USB drive as instructed above if you haven't already. 07:26 Insert the USB, and power on the cabinet normally, The cab will boot to SAM Blitzmas edition if all worked well. Link for downloads and further information: https://www.team-encoder.com/blitzmas Huge thanks to Team-Encoder for this and all your work 👍 *Update* THE-ADM Blitzmas Pack v5 is now available and is recommended over earlier packs. Checkout this video demonstration. Links and information in the description...    • THE-ADM Pack v5 for Team Encoder's Blitzma...   *Update end*