Siteworks Site Calibration Base setup Rover setup Complete Process скачать в хорошем качестве

Siteworks Site Calibration Base setup Rover setup Complete Process

In this video, we will show you how to set up a Siteworks site calibration base and rover using Trimble equipment. Siteworks site calibration is a process of adjusting the coordinates of a GNSS receiver to match the coordinates of known control points. This is important for ensuring that your GNSS measurements are accurate. To set up a Siteworks site calibration base and rover, you will need the following equipment: A Trimble GNSS receiver for the base and rover A Trimble machine kit for the rover (optional) A Trimble data collector A Siteworks software license Once you have all of your equipment, follow these steps to set up the site calibration: 1. *Set up the base receiver.* Place the base receiver on a known control point and turn it on. 2. *Set up the rover receiver.* Place the rover receiver in a location where you want to collect data and turn it on. 3. *Connect the rover receiver to the data collector.* 4. *Open the Siteworks software on the data collector.* 5. *Create a new site calibration project.* 6. *Select the base and rover receivers in the Siteworks software.* 7. *Start the site calibration.* 8. *Collect data at a minimum of five control points.* 9. *Once you have collected data at all of the control points, stop the site calibration.* 10. *Review the site calibration results.* If the site calibration results are satisfactory, you can accept the results and use the calibrated coordinates for your GNSS measurements. Here are some additional tips for setting up a Siteworks site calibration: Use a tripod and stakes to secure the base and rover receivers. Make sure that the base and rover receivers have a clear view of the sky. Avoid setting up the base and rover receivers near trees, buildings, or other obstructions. Collect data at the control points for at least five minutes. Review the site calibration results carefully before accepting them. If you have any questions about setting up a Siteworks site calibration, please reach out to us at: https://sitech-im.com *Keywords:* Siteworks, site calibration, base station, rover, Trimble, GNSS, accuracy, surveying