Glass Flake Reinforced Epoxy Coating system for Offshore Steel at Splash Zone APCS-19C скачать в хорошем качестве

Glass Flake Reinforced Epoxy Coating system for Offshore Steel at Splash Zone APCS-19C

www.theindustryfuture.com #theindustryfuture APCS - 19C 1 2 3 Type of Coating Glass Flake Reinforced Epoxy Coating Systems for Offshore Structural Steel at Splash Zone. General Data 2.1 2.2 2.3 2.4 Typical Use: Corrosion protection for offshore and marine structural steel members at splash zone and atmospheric exposure. Service Conditions and Limitations 2.2.1 2.2.2 2.2.3 Maximum Service Temperature: 93°C Not suitable for Hot Risers in Splash Zone. Suitable for new construction and rehabilitation of existing Structural Steel members Purchase Specification: 09-SAMSS-070 SAMS Stock Number 1000788243/1000788244 (Epoxy) Surface Preparation Requirements 3.1 Minimum Cleanliness Level 3.1.1 3.1.2 Initial (New Construction): SSPC-SP5 (Sa 3) Touch-up and Recoat: SSPC-SP6 (Sa 2) St 3 (SSPC-SP3) for areas less than 0.1 m² 3.2 Profile: Abrasive: 60-100 microns, average 75 micrometers (3 mils) M/N 1000161068, 1000161203 and 1000160374 (S/N 08-220-865, 08-220-895, or 08-202-900) 4 Dry Film Thickness Requirements Total System: 4.1 4.2 New Construction: Two coats @ 600-750 microns per coat and total of 1200-1500 microns Maintenance Coating for Existing Structures: One Coat @ 750 – 1000 microns Commentary Note: Mandatory technical properties and storage, mixing, and application requirements shall be as given in the Saudi Aramco Data Sheets (SAES-H-101V)