У нас вы можете посмотреть бесплатно How to Install LED Ceiling Light?|Step-by-Step Installation Guide for LED Oyster Light -CA-CB или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Installing instruction: Two installation methods: Surface Mount and Junction Box Mount Installation(Please select the most suitable installation method according to your requirement). 1.Surface Mount: Step 1:Rotate the luminaire body along the (→ OPEN) arrow direction on label ,pull down the luminaire body from luminaire base. Step 2:Take down luminaire base by disconnecting the female connector and male connector (on control gear) . Step 3:Drill holes on the ceiling in the corresponding positions according to fix distance of luminaire base,insert M6 wall plugs into the holes,pull the power cable into the luminaire base from cable entry hole, secure the luminaire base onto the ceiling with provided M4 screws. Step 4:Connect the power cable to terminal block on luminaire base according to right wires sequence. Step 5:Insert the female connector into male connector on the control gear and fix the sling into holes of the luminaire body. Step 6:Align the position mark(▲ ) on label of the luminaire body with the position mark(▲ ) on the luminaire base , and then install the luminaire body upwards onto the luminaire base. Step 7:Rotate the luminaire body along the direction of the (CLOSE←) arrow on the luminaire base until fix hole2 on luminaire body was aligned with fix hole1 on luminaire base , and fix provided M3 screw into the holes. 2. Junction box Mount: Step 1 :Refer to the 1,2 steps of Surface Mount. Step 2 :Remove rubber plugs in holes on luminaire base according to corresponding junction box fix holes, Insert provided four waterproof rubber plugs into holes which for surface mount on the luminaire Base. Step 3 :Fix the luminaire base onto junction box with screw. Step 4 :Refer to the 4,5,6,7,8 steps of Surface Mount. Content from:https://www.comledlamp.com/product-ca... #comled #machine #manufacturing #factoryproducts #factory #ledlight #ledceilinglight