etrailer | What to Know About the Furrion Vision S+ Wireless RV Backup System скачать в хорошем качестве

etrailer | What to Know About the Furrion Vision S+ Wireless RV Backup System

Click for more info and reviews of this Furrion RV Camera System: https://www.etrailer.com/RV-Camera-Sy... Check out some similar RV Camera System options: https://www.etrailer.com/dept-pg-RV_C... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-InUse-Fur... Hi, Matt with Etrailer. If you're looking to upgrade from your Furron Vision S, then I gotta say the one probably for you is gonna be the Furron Vision S Plus. So let's take a closer look at it. So today, I'm mainly just gonna be talking about some of the differences between the original one and the new one here, the Plus. After that, I'll tell you how you can actually switch these around really easy. And going into more detail of why it's important that this is gonna capture things more in real time is 'cause the old vision S is great, especially if you just needed to backup somewhere, park your camper. But this one I think is gonna lend it some self more to real time driving. So if you are trying to switch into different lanes, those few seconds can be pretty important depending on how fast people are driving past you. So now let's go over what it's gonna be like to actually switch these out, and that's really easy. Again, we're not gonna be fully installing this, just simply switching it out. And basically, what we're gonna be doing is, if we take a closer look at the new one we have here, the S Plus, you can tell we have these little spots where these tiny screws go. If you remove those, you can simply take this out. We're gonna have the same plug like we did on the old one. And what we're actually gonna do here is remove the old one from that shark fin, and put this new one inside that old shark fin. So lemme show you how to do that real quick. So right here is gonna be the old one. I already removed three of those screws, so let me just do that last one real quick. All you need for this is just a Phillips screwdriver. And eventually that will come right outta here, just like that. And from here, you're just gonna be unplugging this, grabbing your new camera, and this essentially just becomes plug and play. There you go, make sure you hear that click, and when it's secured all the way in there, and when you push this into place, just make sure it's completely flush on all those corners, 'cause sometimes that cable back there can get in your way. There we have it, that's looking much better. And from here, we can start putting those screws in all those corners. But all you have to do from there is just make sure you put that antenna on the camera itself, and make sure you got that seven pole connected to your trailer and your vehicle, and make sure those running lights are on, and from there, the monitor and the camera should already be synced up. But of course if you guys have any other questions, please let us know here at Etrailer. And again, I'm Matt, and thanks for watching.