Ep.13 Wheel Spacer on Mitsubishi Triton VGT 2.4 / Strada / L200 / Sportero скачать в хорошем качестве

Ep.13 Wheel Spacer on Mitsubishi Triton VGT 2.4 / Strada / L200 / Sportero

This all started, when I rotated my tyre, I noticed that the front wheel nut was barely holding on to the wheel bolt. This was due to me putting a 3mm thin spacer previously so the inner section of the rim does not rub the upper-arm knuckle...which lead to this nut barely holding on to the wheel bolt, this can be dangerous as it may come loose later on. So I decided to add spacer to the front so that the nut can fully hold the bolt and balance the poking out of the front and rear tyre. I also applied thread locker to the wheel bolt, don't want it to come off unexpectedly in the long run and I don't want to constantly check if the spacer nut is loose or not. Triton Spacer 25mm Shop link: Shop.com.my/dhyautoaccessories Threadlocker Shop link: Shop.com.my/ssftradingsb Don't forget to support your boy by hitting the LIKE and SUBSCRIBE button ...and also check and follow my instagram https://www.instagram/4x4mitsubishitr...