Hydraulic coil crimping press for motors 04.03.13; Installation for heating press plates 04.03.53 скачать в хорошем качестве

Hydraulic coil crimping press for motors 04.03.13; Installation for heating press plates 04.03.53

Hydraulic coil crimping press for large electric motors (LEM) TDEM 04.03.13 and installation for heating press plates TDEM 04.03.53. After applying the housing insulation to the straight parts of the stator coils (sections) of large high-voltage electric motors using the insulation machine TDEM 04.03.37, it is necessary to use heated pressure on the mica resin taped thermosetting insulation of the section. Hot pressing (baking) is carried out with the control of the set values for pressing time and the heating temperature of the press plates specified in the technical data sheet for the type of mica resin tapes used. During crimping, the groove part of the section acquires the necessary electrical and mechanical strength due to polymerization of the binding compound, as well as the shape in cross section corresponding to the design documentation for the section of the electric motor. To perform the operation of pressing and baking, equipment TDEM 04.03.13 and TDEM 04.03.53 is used in tandem. The installation for heating the press plates TDEM 04.03.53 has two inputs for connecting primary transducers (temperature sensors), a data processing unit for two channels, consisting of a temperature meter-regulator, a time relay, two heating control units for press plates and two outputs for connecting press plates. The heating control of the press plates is carried out independently at both inputs (Post1, Post2) by voltage (phase) regulation on the press plates with current control for each input. The heating temperature, heating time and current are displayed on the control panel of the installation for maximum efficiency. The multifunctionality of the equipment allows you to connect two hydraulic presses to one TDEM 04.03.53 installation, thereby saving money on the purchase of additional equipment. In standard configurations, the hydraulic coil crimping press TDEM 04.03.13 is supplied with three or four clamps for securing the press plate on each support-clamping block, which allows maximum flexibility to meet the needs of the customer in the manufacture of sections with different lengths of slotted parts. The equipment is fairly simple in operation and maintenance, has a reliable hydraulic system and low power consumption. It is not difficult to train one operator to work effectively on two presses at once. Taking into account an individual approach to each of our orders, LLC TRADING HOUSE "ELECTROMASH" will consider YOUR terms of reference for the manufacture of any electrical repair equipment with different parameters from those proposed on our website (www.tdelectromash.com), taking into consideration various climate environments, including tropical climate. The equipment supplier for mechanization, repair process automation and testing of electric motors and transformers, "ELECTROMASH" TRADING HOUSE. "ELECTROMASH" TRADING HOUSE - Your choice for quality and reliability! Electric equipment repair supplier «Electromash» trading house.  For purchasing equipment: LLC Trading House "ELECTROMASH" (TH "ELECTROMASH" I ООО ТД "ЭЛЕКТРОМАШ") 346428, Rostov region, Novocherkassk, street Prosveshcheniya, 106 b www.tdelectromash.com Director: ☏+7 (8635) 22-15-21, 22-15-23 (ext.101/123) ✆+7 (928) 909-22-92 ✉ [email protected] ✉ [email protected] Manager: ☏+7 (8635) 22-15-21, 22-15-23 (ext.118) ✆+7 (929) 815-21-61 ✉ [email protected]