VICENTINI TRIO TYPE DIP GLAZING LINE FOR CERAMIC TABLEWARE скачать в хорошем качестве

VICENTINI TRIO TYPE DIP GLAZING LINE FOR CERAMIC TABLEWARE

TRIO type dip glazing line by Vicentini is a fully automatic line capable of glazing ceramic tableware and small pottery items through an immersion process. It is possible to glaze both single-fired (if the product permits it) and double-fired (biscuit) products according to requirements, by acting on various adjustments of the line. The line can glaze plates, cups, bowls and other ceramic items ensuring maximum quality within the permitted range of sizes, allowing productivity up to 1.200 Pieces/h. The TRIO line can be loaded with stacks of plates or with single pieces by placing the products on the accumulation belt from which an unstacking system picks up the pieces one by one to transfer them to the second conveyor belt where they are centered for stamping the logo on the bottom in fully automatic way. Obviously this process can be disabled if not requested. Another transfer device loads the articles three by three onto the six-station glazing carousel where complete glazing takes place. The glaze necessary for painting the back of the product is automatically inserted into the three supports of each station and is then emptied and filtered at each cycle of the machine. An automatic system of rotating sponges cleans the piece-holder supports at each passage to ensure maximum quality and avoid glaze sediments on the supports. The immersion process is carried out in a glazing tank equipped with a recirculation and cleaning system for the glaze and a system that always keeps the level of the paint fixed and constant to guarantee an always uniform glazing. Rotation, inclination, times and all the other parameters needed to obtain perfect quality can be adjusted using the various commands on the main touch-screen or by selecting programs saved for each product in the PLC. After a few dripping stations, the pieces, always three by three, are unloaded by a transfer device who places them on a double sponge conveyor belt where the foot is automatically cleaned. The finished items arrive on the unloading belt where an operator or an automatic system picks them up from the line. The line is made using the best materials and components on the market, all the parts in contact with the glaze are made of stainless steel and the support structures are made of aluminum profiles to avoid oxidation and simplify assembly operations. www.setec-srl.com info@setecsrl.it